CNC-machined alu nut that holds front lower molded lower suspension holders. Set of two. 

Molded holders for lower suspension pivot pins. Set of four. 

Set of molded composite lower suspension pin holders. The suspension holders have a 0.75mm eccentric hole that lowers the rear roll center. Using the eccentric rear suspension holders will create more rear grip and at the same time increase steering.  

CNC-machined alu brace that aligns and supports the molded lower suspension holders. 

Molded holder set for front upper suspension pivot pins. Complete set of molded holders, O-rings, clips, and setscrews. 

For steering setting and fine tuning
High-quality CNC machined aluminum arm holders are a great add-on for your T1 to help you fine tune your steering. Exchange the standard nylon holder for these alu holders and adjust the steering very precisely - exactly how you will need and require. These eccentric holders will greatly help you to tune and improve the steering characteristic.  

Set of nylon hubs includes: four eccentric hubs for differential ball-bearings, two non-eccentric hubs for layshaft ball-bearings. Eccentric hubs allow for tightening and loosening of front and rear drive belts. 

Pre-assembled center-point steering servo saver. Comes with molded bearing holders. 

This new servo-saver assembly, pre-assembled, has two positions at which to mount the steering arm pivots. Mounting the pivots in these different holes provides different steering Ackerman effects. Great for adjust steering sensitivity.  

Set of two molded bearing holders with eccentric positions. Allows servo saver to be positioned according to steering servo mounting. 

Complete ball-differential set uses new special Swiss 7075 T6 aluminum which is 30% stronger than previous material. Features heat-treated and hardcoated aluminum output shafts, screw for external adjustment, tough composite 34T diff pulley with Labyrinth Dust Covers™, high-performance ball-bearings, high-quality carbide axial thrustbearing, heavy-duty diff washers, and carbide diff balls. Factory pre-assembled. 

XRAY is proud to present the smoothest, highest-quality differential in the RC industry! Manufactured exclusively for XRAY by HUDY, made from world-renowned top-secret Hudy Spring Steel, this high-performance differential set features an exclusive double slotted design, carbide diff balls, new axial ball-bearing with larger balls for smoother operation and ultra-high durability. Impossible to wear out!  

Super Front One-Way Differential 34T for T1 · halves from lightweight alloy, strategically machined to reduce weight · double-slotted, hollowed adaptors from exclusive Hudy Spring Steel · 2 INA one-way bearings · high-quality, lightened pulley withspecial "side click-covers"
 

Front One-Way Differential PRO for XRAY T1 or T1 EVO2. Front axle PRO machined from lightweight alloy, strategically machined for the lightest possible weight without compromising strength. 

New, innovation and new patent – the XRAY Multi-Diff™. This new unique front diff has three different settings: one-way / one-way solid / full-time solid axle.  

Front axle CNC-machined from lightweight aircraft duraluminum, strategically machined to reduce weight. The front axle includes two precision fit-pressed INA one-way bearings, specially ground for maximum precision. 

Front axle for 305101 One-Way Differential PRO. CNC machined from lightweight aircraft duraluminum, strategically machined
for the lightest possible weight without compromising strength. Includes two precision press-fit INA one-way bearings. 

CNC-machined main axle for Multi-Diff™ for XRAY T1, T1Evo2, T1R, T1M, and T1FK.
This axle does NOT fit the Multi-Diff™ for XRAY T1FK’05.
 

Multi-Diff™ locking axle is CNC-machined from Hudy Spring Steel™. Fits both #305102 and #305103 Multi-Diffs™ for all XRAY T1 cars. Must only be used with #305131 Inner Driveshaft Adapters. 

Front drive adaptors for front one-way differential. Manufactured from world-renowned top-secret "Hudy Spring Steel". These adaptors feature exclusive double slotted design, that is possible only using Hudy Spring Steel material. Ultra light, extremely strong. Set of two. 

Precision-machined, specially-lightened outdrives for use with all XRAY T1 front one-way axles (including Multi-Diff™). The new lightweight one-way out drives manufactured from Hudy Spring Steel have a hex hole machined at each end.  

High-quality, lightened molded 34 teeth pulley with special "side click-covers" for front one-way differential. 

Precision molded composite "low ratio" front pulley (32T) and side covers.
This front pulley may be used on the #305101 One-Way Differential or the #305180 Alu Solid Axle. The teeth number (32) is embossed into the side of the pulley for easy identification. 

New solid axle, CNC-machined from highest-quality lightweight aircraft duraluminum, hard coated for long life. Comes complete with pulley, covers, and hardware. 

For serious racers looking for an edge, XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle transforms the XRAY Multi-Diff into a full-time solid axle only; remaining parts must be used from the Multi-Diff. Fits all XRAY touring cars.

Used by XRAY Factory Team - a "must have" for serious racers. 

High-performance Kevlar-reinforced front drive belt, 3mm wide x 507mm long. 

Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."  

Set of four O-rings used to seal the bottom shock cap to shock body. 

High quality ball-bearings 4x7x2.5 Set of two.  

High-quality ball-bearings 10x15x4 (set of 2). 

Ultra High-Performance, High-Quality Ball-bearings
Top-quality professional ball-bearings for a super free and super smooth drive train. These highest quality ball-bearings are fitted with special polyamid blue covers and plastic ball cage for maximum smoothness, long life, highest tolerance and maximum performance. These ball-bearings have more balls inside the cage than the regular ball-bearings, making them much more resilient under loads. The blue polyamide covers are easy to remove for quick and comfortable servicing. A "must have" item!  

High-performance high-quality ball-bearing
Top-quality professional ball-bearings for super free and super smooth drive train. These are the most quality ball-bearings with special polyamid blue covers and plastic cage for balls for maximum smooth operation, long life, highest tolerance and maximum performance. These ball-bearings have more balls inside the cage than the regular ones, that makes the ball-bearings higher performance. The covers are easy removable for quick and comfortable servicing. A must have item!
A complete set of 12 ball-bearings will substitute all 10x15x4 ball-bearings on your T1.
 

New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.  

New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.  

Set of shims for setting static wheelbase. Fits over rear lower pivot pins, servo saver, front one-way diff and other shims. 

Hex screw M3x10. Set of 10 pieces. 

Hex setscrews M3x4. Set of 10 pieces. 

C-clip 6.5 Set of 10 pieces. 

Special lubricant for one-way bearings used in one-way differentials or on the main layshaft. Lubricant improves engaging speed and increases one-way bearing durability. A must for the serious racer. A drop will cure a slipping one-way immediately. 

M3x4 setscrew, hex drive. Set of 10 pieces. 

M3x10 button-head machine screw, hex drive. Set of 10 pieces. 

High-quality ball-bearings ID x OD x thickness (mm) = 4x7x2.5mm. Set of 2 pieces. 

High-quality ball-bearings ID x OD x thickness (mm) = 10x15x4mm. Set of 2 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4. Set of 2 pieces. 

6.5mm dia. C-clip. Set of 10 pieces. 

Rubber O-ring fits over 5mm shaft. 1mm thick. Set of 10 pieces. 

Rubber O-ring 1.5mm thick x 10mm dia. Set of 10 pieces. 

Polished chrome pin. Dia. x length = 2mm x 12mm. Set of 10 pieces.